Here are the changes. Other than that, not sure. I will have to look into it as I haven't played with Tp in a while. If you find anyting out, let me know.
************** 0.8 Beta TP Only ADX Revision History ***************
10/17/2011 - Paul
SUGGESTED COM PORT SETTINGS:
Hardware com port latency settings: Set transfer size to max (4096) and latency timer to minimum. (1).
CORRECTION - Changed ALDL Timeout from 400ms to 100ms to help stop lost of data when monitoring/recording. Version .7 settings were wrong.
************** 0.7 Beta TP Only ADX Revision History ***************
10/6/2011 - Paul
SUGGESTED COM PORT SETTINGS:
Hardware com port latency settings: Set transfer size to max (4096) and latency timer to minimum. (1).
Changed ALDL Timeout from 200ms to 400ms to help stop lost of data when monitoring/recording
Renamed Injector Base Pulse Width to Injector Pulse Width
MPG Calc - This is setup in the ALDL for a V8 and 60lb injectors at 43.5 PSI.
Formula is :
X/(C*0.0000212*(Y)*(Z))
X,C,Y and Z are linked to other ALDL values for the calulation.
X=MPH
C=Injector Size (User)
Y=RPM
Z=Injector Pulse Width
To Calulate for a V6, Multiple result by 8/6. Change formula to 8/6*(X/(C*0.0000212*(Y)*(Z)))
To Calulate for a 4-Cylinder, Multiple Result by 8/4. Change formula to 8/4*(X/(C*0.0000212*(Y)*(Z)))
Injector Size (User) - To Change the Injector size, edit the Injector Size (User) forumla on the conversion tab
Formula for Injector Sizing
(New Pressure/Rated Pressure)*Injector Flow Rate in Lbs/hr
Example: 50lb injectors rated at 42psi being ran at 60psi
(60/42)*50 is what the formula should be in the conversion tab.