money

Author Topic: Injector Scalar  (Read 2167 times)

Offline FreshDA9

  • Newbie
  • *
  • Posts: 1
Injector Scalar
« on: April 29, 2016, 08:38:21 pm »
Downloaded 1.6 and 1.7 lite XDF's from the forum but did not see any injector scalar in either. Where am i overlooking this table. I am use to tuner pro on EE platforms and $8D kinda new to syty ecms.

Offline john

  • Sr. Member
  • ****
  • Posts: 415
Re: Injector Scalar
« Reply #1 on: May 09, 2016, 09:54:12 pm »
there is none.. erg to bpw is the closest thing to it. use that to get it running and then adjust ve table
 

Offline Paul

  • Administrator
  • Hero Member
  • **********
  • Posts: 1801
Re: Injector Scalar
« Reply #2 on: May 19, 2016, 04:48:41 pm »
The closest there is is the F92(F92_TABLE Fuel Bias - Injector Offset vs Battery Voltage) and f28 ([/size]F28_TABLE Base Pulse Const. vs Desired EGR)[/color] table. 

[/size]F92 lets you adjust the voltage to match your injectors.  Most bins on here were based off the Stock SyTy 32lb Bin and never adjusted a lot of the base tables.  They mainly adjusted F28, F1, F29x, F77x for fuel and spark.  Most of the other tables were not touched.  If you adjust the F92 to match your injectors size it will affect the entire fuel tune.  So you will need to make sure that is correct first.


F28 is the base fuel table that applies mainly to what you were asking.  Final VE = f28  + F29x tables (final ve cannot be over 100)



Paul Schwab
Code 59 Tester
Code 59 XDF and ADS Code Monkey
93 Black/Black Typhoon #424
93 White/White Typhoon #454 - Bought the one that started it all for me back.

 


anything